Heavy Duty Laminator
H20 Heavy Duty Roll Laminator Dual Hot Roll can handle most jobs for any print shop. It's great for doing menus, signs, book covers, and a variety of projects.
Variable speed. The laminator operates at any speed up to 10 feet / 3 meters per minute. Thicker hot films are generally applied better at mid-range to lower speeds, while 1.5 mil hot films should be applied at mid-range to higher speeds.
Attached safety shield. The polycarbonate shield is clear so operators can see their work. It does not conduct heat so they’ll be protected from hot areas. It is fixed to the laminator and the machine will not run if the feed tray and safety shield are not in place.
Lamination pressure. The rubber rollers are spring-loaded and pre-set to ensure correct and even lamination pressure. The pressure is easy to adjust if required when performing routine maintenance.
Ease of cleaning. The heated silicone rubber laminating rollers, and the silicone rubber pull rollers of the laminator should be cleaned regularly. The safety shield (see below) on the laminator swings away in seconds, making it easy to clean the laminating rollers.
Precision Heat Controls. Individual top and bottom heat controls, as used on our other Digital Laminators, allow for even, consistent heating of the laminating rollers throughout the entire temperature range.
Supply roll tension controls. Supply roll tension is easy to adjust by simply tightening or loosening the tension control knobs on the supply roll mandrels.
Feed tray pressure strip. This strip on the front of the feed tray holds images flat as they go into the laminator, making it easier to handle the lightweight papers sometimes used in digital imaging.
Ease of maintenance. The H20 laminator is made to last. However, some items on a laminator do wear out. Even the high-quality silicone rubber used in the rollers will lose flexibility over time. Extensive use may wear out the rollers, or an operator may cut a roller by accident. Rollers and other key parts can be changed quickly without disassembling the frame.
- Precision Feed Table Casters
- Slitter Assembly Stand
- 1" supply roll mandrels
- Additional slitter heads
|Type of heating||Hot Roll|
|Max lamination width||20"|
|Standard laminating roller diameter||2.75"|
|Supply roll core diameter||3"|
|Recommended film thickness||up to 10 mil|
|Max laminating thickness||1/2"|
|Max supply roll outside diameter||14"|
|Dimensions (including stand)||52"Lx39"Hx32.5"D|
|Shipping Weight||450 lbs|
|# of phases||Single|
|Motor||1/4 HP DC - variable speed|
|Electric Supply Plug||NEMA L6-20P|
|Lamination Type||Thermal/Pressure Sensitive (PSA)|
|Max. Film Width||20"|
|Heat Type||Heated Rollers|
|Max. Lamination Thickness||1/2"|
|Roll Film Core Size||3"|
|Manufacturer's Warranty||2 Years|